オンラインでのご相談受付がスタートしました！
当社では、盛和環境エンジニアリング株式会社製の光触媒環境浄化装置を販売しております。
盛和環境エンジニアリング株式会社へはこちらから
病院の個室やトイレ、室内のアルデヒド対策に。
| 適応空間 | 9～36㎡ |
|---|---|
| 本体サイズ・重量 | W474ｍｍ× H165ｍｍ× D155ｍｍ（取手含まず）
約4.0㎏ |
| 本体材質・仕上げ | アルミ・メラミン焼付け塗装 |
| 最大処理風量・騒音 | 1.5㎥/min 35ｄB |
| 電源・消費電力 | AC 100V 30W 1.0A 50Ｈz／60Ｈz |
| 本体構成 | UV-Aランプ：10W×2本（定格寿命：約5,000時間）
特殊光触媒セラミックフィルター(120mm×300mm×15t)×2段 プレフィルター1枚 |
| オプション | 壁掛け用ブラケット |
| 許容周囲温湿度 | 5～40℃ 85%以下 |
| 備考 | ― |
薬品を用いる卓上作業、病院の除菌・脱臭対策に。
| 適応空間 | 14～64㎡ |
|---|---|
| 本体サイズ・重量 | W501ｍｍ× H394ｍｍ× D200ｍｍ（取手含まず）
9.0㎏ |
| 本体材質・仕上げ | アルミ・メラミン焼付け塗装 |
| 最大処理風量・騒音 | 3.0㎥/min 40ｄB |
| 電源・消費電力 | AC100ｖ 86W 1.4A 50㎐/60㎐ |
| 本体構成
TYPE：S2 |
UV-Ａランプ：10W×7本（定格寿命：約5,000時間）
プレフィルター×1枚 光触媒セラミックフィルター（420mm×295mm×15ｔ）×2段 |
| 本体構成
TYPE：M2 |
UV-Aランプ（強力型）：10W×7本（定格寿命：約4,000時間）
プレフィルター×1枚 特殊光触媒セラミックフィルター（420mm×295mm×15ｔ）×2段 |
| 許容周囲温湿度 | 5～40℃ 85%以下 |
| 備考 | ― |
場所を取らない埋め込みタイプ。
喫煙室から病院・介護施設まで幅広く使用できます。
| 適応空間 | 30～100㎡ |
|---|---|
| 本体サイズ・重量 | W905ｍｍ× H330ｍｍ× D1215ｍｍ
65㎏ |
| 本体材質・仕上げ | SS400(メラミン焼付け塗装) |
| UVランプ | 300W(15W×12本) 約5,000時間(定格寿命) |
| 搭載フィルター | 光触媒フィルター(500mm×600mm×15mm(厚さ))2段
プレフィルター |
| オプション | HEPAフィルター |
| 最大処理風量/騒音 | 14m3/min 48db |
| 消費電力 | 450W AC 100V 5.0A |
| 使用温度、湿度 | 5～40℃ 20～85% |
| 備考 | 天井開口寸法は750x1090 |
場所を取らない埋め込みタイプ。
喫煙室から病院・介護施設まで幅広く使用できます。
| 適応空間 | 18～82㎡ |
|---|---|
| 本体サイズ・重量 | W360ｍｍ× H700ｍｍ× D360ｍｍ
35㎏ |
| 本体材質・仕上げ | SS400(メラミン焼付け塗装) |
| UVランプ | 90W(15W×6本) 約5,000時間(定格寿命) |
| 搭載フィルター | 光触媒フィルター(420mm×295mm×15mm(厚さ))2段
プレフィルター |
| オプション | ― |
| 最大処理風量/騒音 | 4.5m3/min 56db |
| 消費電力 | 215W AC 100V 3.0A |
| 使用温度、湿度 | 5～40℃ 20～85% |
| 備考 | ― |
動物飼育施設の脱臭や、低濃度VOCの除去に
| 適応空間 | 30～100㎡ |
|---|---|
| 本体サイズ・重量 | W830ｍｍ× H1605ｍｍ× D450ｍｍ
190㎏ |
| 本体材質・仕上げ | SS400(メラミン焼付け塗装) |
| UVランプ | 320W(40W×8本) 約5,000時間(定格寿命) |
| 搭載フィルター | 光触媒フィルター(1180mm×320mm×15mm(厚さ))2段
プレフィルター アフターフィルター |
| オプション | ― |
| 最大処理風量/騒音 | 15m3/min 58db |
| 消費電力 | 550W AC 100V 6.0A |
| 使用温度、湿度 | 5～40℃ 20～85% |
| 備考 | ― |
動物飼育施設の脱臭や、低濃度VOCの除去に。
| 適応空間 | 45～180㎡ |
|---|---|
| 本体サイズ・重量 | W360ｍｍ× H700ｍｍ× D360ｍｍ
35㎏ |
| 本体材質 | SUS304 |
| UVランプ | 560W(20W×28本) 約7,500時間(定格寿命) |
| 搭載フィルター | 光触媒フィルター(430mm×600mm×15mm(厚さ))8段
プレフィルター アフターフィルター |
| オプション | HEPAフィルター |
| 最大処理風量/騒音 | 20m3/min 56db |
| 消費電力 | 1.3kW AC 100V 13A |
| 使用温度、湿度 | 5～40℃ 20～85% |
| 備考 | ― |
有機溶剤等を用いる卓上作業時に。
| 適応空間 | 12～36㎡ |
|---|---|
| 本体サイズ・重量 | W350ｍｍ× H270ｍｍ× D225ｍｍ
12㎏ |
| 本体材質 | SUS304(ヘアライン加工) |
| UVランプ | 162W(27W×6本) 約4,000時間 |
| 搭載フィルター | 光触媒フィルター(265mm×275mm×20mm(厚さ))3段
プレフィルター |
| オプション | 有機溶剤特化型 |
| 最大処理風量/騒音 | 4.0m3/min 55db |
| 消費電力 | 208W AC 100V 3.1A |
| 使用温度、湿度 | 5～40℃ 20～85% |
| 備考 | ― |
有機溶剤等を用いる部屋の気中濃度低減、動物飼育室の脱臭に。
| 適応空間 | 12～36㎡ |
|---|---|
| 本体サイズ・重量 | W350ｍｍ× H270ｍｍ× D225ｍｍ
12㎏ |
| 本体材質 | SUS304(ヘアライン加工) |
| UVランプ | 162W(27W×6本) 約4,000時間 |
| 搭載フィルター | 光触媒フィルター(265mm×275mm×20mm(厚さ))3段
プレフィルター |
| オプション | 有機溶剤特化型 |
| 最大処理風量/騒音 | 4.0m3/min 55db |
| 消費電力 | 208W AC 100V 3.1A |
| 使用温度、湿度 | 5～40℃ 20～85% |
| 備考 | ― |
| 適応空間 | 1～4㎡ |
|---|---|
| 本体サイズ・重量 | W130ｍｍ× H130ｍｍ× D130ｍｍ
1.8㎏ |
| 本体材質 | AL(アルマイト処理) |
| UVランプ | UV-LED/VIS-LED |
| 搭載フィルター | 光触媒フィルター(100mm×100mm×10mm(厚さ))2段
プレフィルター |
| オプション | ― |
| 最大処理風量/騒音 | 0.4m3/min 35db |
| 消費電力 | 8W AC 100V 0.15A |
| 使用温度、湿度 | 5～40℃ 20～85% |
| 備考 | ― |
食肉加工の現場のコスト削減
設備投資で工場の人件費を減らしたい
加工技術の均一化を目指したい
そんな事業者様のお悩みを私たちが解決します。
8時～17時（土・日・祝日を除く）
The lift is to bring down the pig's live bodies which are taken by trucks at the moorage.
The vehicles are sterilized at the entrance and the exit of the factory. After entering in the house, the vehicles stop to be sprayed with disinfectant. Then, the gate is opened and the sterilized vehicles pass throught the house. (Available to order upon your request)
This is the high powered abstergent washer with its strong turning water flow and the micro-bubbles made by high-speed reverse.
This is to excise chicken muscle and to correct thickness of the meat. The chickens which are sent from the previous process flow are conveyed automatically to the blade unit for excision, and then pressed in evenly sized thickness by the press unit located at the conveyor of ejection side. It is easy to replace a blade of the blade unit and the press unit and to fix thickness of the meat.
The device is to cut meat, organs, fishes and others in a fixed width at once. Put the products on the input conveyor to send the cutter part, and then cut products come out by the discharge conveyor. The device is decomposable without tools for easy cleaning on a hygienic perspective.
The conveyor is for fat and bones arisen by deboning and fairing operation.
Stainless-steel main body and the material of belt such as plastic, intralox and others can be changed at customer's request.
The conveyor is to operate from deboning to fairing the sub primal cuts of pork. Stainless steel, plastic belt, intralox and others are built upon your request.
This is the stainless-steel conveyor to feed the shoulder, loin, back ribs and ham by primal cutting of carcass to the cutting conveyor belt.
Conveyor for subprimal and etc.
For subprimal wrapping use. The device automatically sends the film in designated arbitrarily-size from the whole film and cuts it. The wasted time of wrapping work is eliminated by cut films being ready during the meat cutting.
Putting your hand closer to the mounted sensor on the front of the device makes it start automnatically. There is no accident such as cutting fingers by mistake and others since the knife moves to operate in a horizontal direction. Prompt replacement of the film at the time of used it up is possible by the space film stocked under the cradle.
The structure is easy to maintenance since converyor belt and the cover are completely removable by hand without using tools.
Ham is remained at the last stage of primal cut process flow of pork carcass. It is hard to take down the ham due to being hanged at the rising point beneath the rail.
The hams, which are conveyed automatically from the process of loin and back ribs, are slipped automatically.
The traditional detachment work of blade bones has been required strong arms using with a handspike-end. Mrs. Easy is developed to detach a blade bone easily with one push button by hooking on the small of the joint. Even female and elder workers can work without fatigue by using this machine. The parts connecting to meat is washable as driving source is not electric power but air only. The consumable is the only the gut which connect a cylinder and a hook. So the maintenance is easy.
Since person's movement is converted completely to the machine, you can make immediate full use of this. Furthermore, you can improve current efficiency of your work and keep it sustainable.
Regardless of gender, equivalent work efficiency is guaranteed.
This is the compact type of a direct-drive air-cylinder, and also the consumable is only replacement type nylon guts due to the equipped lever for use of the power effectively.
Spring balance is used. The compact device contributes the easy well-organizing in the work place before and after works or while sweeping.
Wash off the attached foreign matters such as hair and others on pig's fat with warm and normal water. and get them cool.
Wash off the attached foreign matters such as hair and others on pig's fat with warm and normal water. and get them cool.
The work to divide upper jaw and under jaw of pig's head requires a lot of power. The head divider is designed to prevent the foreign matters contamination by chipping teeth.
The machine is able to effectively remove such fouling as the remaining hair and filth automatically after decorticating.
After heads are set on the machine one by one, the machine conveys them sequentially to the washing chamber, and makes high-pressure washing by cleaning water. The heads are automatically ejected after washing.
The machine is to burn the remaining hair on epilated pig's trotters automatically.
Trotters which are stuck in needles attached on the chain by hand, are conveyed to the firing chamber and burnt the remaining hair while passing through with spinning. The baked trotters fall out of the needles automatically after passing through the chamber.
The machine is available to use for ears and big tails.
The system discharges the side products such as organs, skins, fat and others outside quickly from such rooms as organs treatment and others by pneumatic dispatch.
This makes conveyor wagons in the rooms of slaughtering and organs unnecessary, and keeps floor clean and sanitaly without dirt. No worker is necessary for ejection.
The best suited machine for small lot production of boiling operation for small intestines, large intestines and craw. By pressing the switch the reversing gear makes the boiled organs move to a receiving hopper easily without ejection by hand.
The temperature of hot water is automatically controlled by temperature controller, and the exhaust hoot is equipped to suppress steam blowing.
Enable to continuously automate the boiling and cooling processes of small intestinies, large intestines and craw.
Products are unifomity by quantitative supply of organs.
Both tanks of boiling and cooling are automatically controlled by temperature controller.
After making a cut in the cecum side of dumpling-like large intestine of pigs, incision operation is made nothing but insert the intestine into a guilding pole. It is possible to operata a bipartite and over type for a person.
Operations of incision and fat removal can be done in parallel. Incision is operated rapidly, and amount of fat on the intestines is controllable freely. Cut off mesentery and incise small intestines at the same time. Incision is finished clean without signs of injury on small intestines.
Organs of pigs are conveyed in parts as red offal, white offal and heads, and then heads are automatically ejected from the Designing manufacturing and constructing of the consistent organs treatment system in the treatment room from the visceral examination conveyor to the boiling system are acceptable.
Organs of pigs are conveyed in parts as red offal, white offal and heads, and then heads are automatically ejected from the line.
The device drains automatically each dressed carcass cleaned by the automatic washer.
The food rubber scraper having beneficial adhesion drains effectively and hygienically.
The back split carcasses being hoisted by trolley hooks are cleaned automatically in each inside the closed door washing chamber. Filthy water after used for cleaning is taken by a pan without sprinking on the floor and then run to a culvert.
CThe carcasses being hoisted by trolley hooks after exsanguination are cleaned automatically in each with passing through the washer.
Filthy water after used for cleaning is taken by a pan without sprinking on the floor and then run to a culvent.
Carcasses being transported to the end of exsanguination conveyor are hoisted just above. Then carcasses are sent to the conveyance rail automatically in measuring chains and good timing.
Put some hot water or water in the tank, and sterilize instruments for over 7 seconds in the hot water of over 83℃ heated by electric heater or steamer. Building the device handled by either electric heater or steamer according to your request is acceptable.