Lift for Pig's Live Body Hoisting

The lift is to bring down the pig's live bodies which are taken by trucks at the moorage.

Vehicle Sterilizing House

The vehicles are sterilized at the entrance and the exit of the factory. After entering in the house, the vehicles stop to be sprayed with disinfectant. Then, the gate is opened and the sterilized vehicles pass throught the house. (Available to order upon your request)

Omasum Washer "Nanmaida"

This is the high powered abstergent washer with its strong turning water flow and the micro-bubbles made by high-speed reverse.

Meat Master Presser

This is to excise chicken muscle and to correct thickness of the meat. The chickens which are sent from the previous process flow are conveyed automatically to the blade unit for excision, and then pressed in evenly sized thickness by the press unit located at the conveyor of ejection side. It is easy to replace a blade of the blade unit and the press unit and to fix thickness of the meat.

Multi Cutter

The device is to cut meat, organs, fishes and others in a fixed width at once. Put the products on the input conveyor to send the cutter part, and then cut products come out by the discharge conveyor. The device is decomposable without tools for easy cleaning on a hygienic perspective.

Fat and Bones Conveyor

The conveyor is for fat and bones arisen by deboning and fairing operation.
Stainless-steel main body and the material of belt such as plastic, intralox and others can be changed at customer's request.

Deboning and Fairing Conveyor

The conveyor is to operate from deboning to fairing the sub primal cuts of pork. Stainless steel, plastic belt, intralox and others are built upon your request.

Primal Cuts Conveyor

This is the stainless-steel conveyor to feed the shoulder, loin, back ribs and ham by primal cutting of carcass to the cutting conveyor belt.

Intralox Conveyor

Conveyor for subprimal and etc.

"Tsutsumu-chan" for hand-rolled wrapping(Auto Feed Cutter)

For subprimal wrapping use. The device automatically sends the film in designated arbitrarily-size from the whole film and cuts it. The wasted time of wrapping work is eliminated by cut films being ready during the meat cutting.
Putting your hand closer to the mounted sensor on the front of the device makes it start automnatically. There is no accident such as cutting fingers by mistake and others since the knife moves to operate in a horizontal direction. Prompt replacement of the film at the time of used it up is possible by the space film stocked under the cradle.
The structure is easy to maintenance since converyor belt and the cover are completely removable by hand without using tools.

Pork Carcass Ham Slipping Machine "Momoe-chan Ⅱ"

Ham is remained at the last stage of primal cut process flow of pork carcass. It is hard to take down the ham due to being hanged at the rising point beneath the rail.
The hams, which are conveyed automatically from the process of loin and back ribs, are slipped automatically.

Mrs. Easy (Blade bone Detachment Machine)

The traditional detachment work of blade bones has been required strong arms using with a handspike-end. Mrs. Easy is developed to detach a blade bone easily with one push button by hooking on the small of the joint. Even female and elder workers can work without fatigue by using this machine. The parts connecting to meat is washable as driving source is not electric power but air only. The consumable is the only the gut which connect a cylinder and a hook. So the maintenance is easy.

Mr. Tender　(Rib Detachment Machine)

Since person's movement is converted completely to the machine, you can make immediate full use of this. Furthermore, you can improve current efficiency of your work and keep it sustainable.
Regardless of gender, equivalent work efficiency is guaranteed.
This is the compact type of a direct-drive air-cylinder, and also the consumable is only replacement type nylon guts due to the equipped lever for use of the power effectively.
Spring balance is used. The compact device contributes the easy well-organizing in the work place before and after works or while sweeping.

Pig's fat Washing System

Wash off the attached foreign matters such as hair and others on pig's fat with warm and normal water. and get them cool.

Pig's fat Washing System

Wash off the attached foreign matters such as hair and others on pig's fat with warm and normal water. and get them cool.

Head Divider "Tonkatsu-Kun"

The work to divide upper jaw and under jaw of pig's head requires a lot of power. The head divider is designed to prevent the foreign matters contamination by chipping teeth.

Pig's head Washer

The machine is able to effectively remove such fouling as the remaining hair and filth automatically after decorticating.
After heads are set on the machine one by one, the machine conveys them sequentially to the washing chamber, and makes high-pressure washing by cleaning water. The heads are automatically ejected after washing.

Remaining Hair Burning Machine for Pig's Trotters

The machine is to burn the remaining hair on epilated pig's trotters automatically.
Trotters which are stuck in needles attached on the chain by hand, are conveyed to the firing chamber and burnt the remaining hair while passing through with spinning. The baked trotters fall out of the needles automatically after passing through the chamber.
The machine is available to use for ears and big tails.

Waste Pneumatic Dispatch Tube System

The system discharges the side products such as organs, skins, fat and others outside quickly from such rooms as organs treatment and others by pneumatic dispatch.
This makes conveyor wagons in the rooms of slaughtering and organs unnecessary, and keeps floor clean and sanitaly without dirt. No worker is necessary for ejection.

Compact Boiling Machine
(patch type with reversing gear for ejection)

The best suited machine for small lot production of boiling operation for small intestines, large intestines and craw. By pressing the switch the reversing gear makes the boiled organs move to a receiving hopper easily without ejection by hand.
The temperature of hot water is automatically controlled by temperature controller, and the exhaust hoot is equipped to suppress steam blowing.

Organs Automatic Boiling System

Enable to continuously automate the boiling and cooling processes of small intestinies, large intestines and craw.
Products are unifomity by quantitative supply of organs.
Both tanks of boiling and cooling are automatically controlled by temperature controller.

Large Intestines Incision Machine "Dome-kun"

After making a cut in the cecum side of dumpling-like large intestine of pigs, incision operation is made nothing but insert the intestine into a guilding pole. It is possible to operata a bipartite and over type for a person.

Small Intestines Incision Machine "Gitter-man"

Operations of incision and fat removal can be done in parallel. Incision is operated rapidly, and amount of fat on the intestines is controllable freely. Cut off mesentery and incise small intestines at the same time. Incision is finished clean without signs of injury on small intestines.

Pig's Organs Treatment Room

Organs of pigs are conveyed in parts as red offal, white offal and heads, and then heads are automatically ejected from the Designing manufacturing and constructing of the consistent organs treatment system in the treatment room from the visceral examination conveyor to the boiling system are acceptable.

Organs Examination Pan Conveyor BCM

Organs of pigs are conveyed in parts as red offal, white offal and heads, and then heads are automatically ejected from the line.

Dressed Carcass Drainer Device

The device drains automatically each dressed carcass cleaned by the automatic washer.
The food rubber scraper having beneficial adhesion drains effectively and hygienically.

Dressed Carcass Washer

The back split carcasses being hoisted by trolley hooks are cleaned automatically in each inside the closed door washing chamber. Filthy water after used for cleaning is taken by a pan without sprinking on the floor and then run to a culvert.

Carcass Washer

CThe carcasses being hoisted by trolley hooks after exsanguination are cleaned automatically in each with passing through the washer.
Filthy water after used for cleaning is taken by a pan without sprinking on the floor and then run to a culvent.

Hoisting Device

Carcasses being transported to the end of exsanguination conveyor are hoisted just above. Then carcasses are sent to the conveyance rail automatically in measuring chains and good timing.

MATOYA Hot Water Sterilizer
(shared device for catties and pig)

Put some hot water or water in the tank, and sterilize instruments for over 7 seconds in the hot water of over 83℃ heated by electric heater or steamer. Building the device handled by either electric  heater or steamer according to your request is acceptable.

Kenichirou Kamada
Associate Manager at Head Office

I am Kenichiro Kamada of the head office sales department. We will produce the big device in future. I wait an item heartily. I do my best for a customer. We hope to be honored with your orders.Please come to drink tea if you come near a company.

Yukihito Fukuchi
Section Chief of Sales department and Sales promotion at Head Office

I am Yukihito Fukuchi of the head office sales department.
I can watch the software of the sequencer, too.Feel free to ask me anytime.

Koji Nakayoshi
Chief of Tokyo Office

I am koji Nakayoshi of the tokyo office manager
There is experience of the layout and fabrication until now.
There are also the experience of launching at kyushu  as well as aboard．
I am good at the business of the suggestion type that I made use of it in.
Of course，we will handle the maintenance too．
I do my best to be able to offer the product which a visitor was satisfied with.

Ryoichi Matsudome
Advisor

At work, I was involved in the automation of cold forged coolant equipment and meat production equipment, and the sales and maintenance of transportation lines.
We will respond cheerfully and sincerely, think together from the customer's point of view, narrow down our wisdom, and respond to labor saving and labor saving.

Kyohei Iida
Sales department at Osaka Office

My name is Kyohei Iida, Head Office Sales Department.
As a salesman in charge of cold forging, meat, and poultry, I will do my best to make our customers happy by making use of my experience and expertise in machine manufacturing.